Sanyo TVS-1430MA TV Service Menu

Sanyo TVS-1430MA
Sanyo TVS-2142MA
Two modes of use Service Menu : S and D to enter the Service mode, press Volume on TV panel to 0 keep it pressed,
press DISPLAY on the remote control.
To enter the D mode, once in the Service mode, select VP60,
must have the value 00, then press Volume on TV or released,
press DISPLAY on the remote control. To change channels or adjust
user, without leaving the Sanyo tv service mode, press DISPLAY on Sanyo TVS remote.

Sanyo TVS-1430MA TV Service Menu mode
Before you entering sanyo factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.

Service Menu Sanyo TVS-1430MA TV

Sanyo TVS-1430MA TV Service Menu

Photo credit : emtblog.com