Samsung Plasma TV Service Menu
Samsung Plasma TV Service mode
Enter to Factory menu-mode press Mute => 1 => 8 => 2 => Power with the power off.
Access the PDP option sub menu item.
Access the Pattern select submenu item.
Use channel up/down to select and use volume up/down to change the value of factory mode.
Scroll through the different patterns. These test patterns are generated on the Logic Board. If these patterns are displayed properly, the problem is before the logic board. This can be problem with the Logic-Main Board LVDS interconnect cable or a problem with the Main board. If the patterns are not displayed properly, the problem is probably caused by a defective Logic Board. Additionally a dead set may also be caused by the Logic board not sending out the relay on command. This can also be a set that cycles on or off quickly at startup.
Samsung Plasma TV Service mode
Before you entering Samsung plasma factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.
Enter to Factory menu-mode press Mute => 1 => 8 => 2 => Power with the power off.
Access the PDP option sub menu item.
Access the Pattern select submenu item.
Use channel up/down to select and use volume up/down to change the value of factory mode.
Scroll through the different patterns. These test patterns are generated on the Logic Board. If these patterns are displayed properly, the problem is before the logic board. This can be problem with the Logic-Main Board LVDS interconnect cable or a problem with the Main board. If the patterns are not displayed properly, the problem is probably caused by a defective Logic Board. Additionally a dead set may also be caused by the Logic board not sending out the relay on command. This can also be a set that cycles on or off quickly at startup.
Samsung Plasma TV Service mode
Before you entering Samsung plasma factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.
Photo credit : fashion-kid.net