Thomson TV Service Menu
Thomson TX-90 TV Service mode
Before you entering Thomson factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.
Thomson TX-90 TV Service Menu-mode
To activate the service mode please turn off the television using remote control (Standby mode).
After the television was in stanby mode please switch off the TV using main switch.
Wait about 3 second until the led power turn off and press VT button on remote control and main switch on TV at the same time to turn on the television.
Press VT button again to open factory mode.
Press volume up or volume down to change the value and using channel button to select parameter.
To save the settings please turn off the television.
Before you entering Thomson factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.
Thomson TX-90 TV Service Menu-mode
To activate the service mode please turn off the television using remote control (Standby mode).
After the television was in stanby mode please switch off the TV using main switch.
Wait about 3 second until the led power turn off and press VT button on remote control and main switch on TV at the same time to turn on the television.
Press VT button again to open factory mode.
Press volume up or volume down to change the value and using channel button to select parameter.
To save the settings please turn off the television.