General Electric TV Service Menu
General Electric TV Service mode
Before you entering General Electric factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
General Electric TV Service mode
General Electric Turn on TV. Press the MENU button and keep it pressed while pressing POWER and
then VOL +. P00 is displayed and V00. Press VOL + to indicate
V76, then press CH + / - selecting items and VOL + / - the standard of the same. To exit and save changes, press POWER. Please note: The item is the frequency P01 horiz. If too low to activate the protection, and the TV was locked.
Before you entering General Electric factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
General Electric TV Service mode
General Electric Turn on TV. Press the MENU button and keep it pressed while pressing POWER and
then VOL +. P00 is displayed and V00. Press VOL + to indicate
V76, then press CH + / - selecting items and VOL + / - the standard of the same. To exit and save changes, press POWER. Please note: The item is the frequency P01 horiz. If too low to activate the protection, and the TV was locked.