Pioneer PDP-4214 Service Menu
Pioner PDP-4214 Service Menu
42" Inch LCD Plasma Display
Press the {INPUT} button on the remote.
The input list will come up.
Then press the {0} {9} {1} {7} buttons on the remote.
Press channel up or down to select parameter.
Press volume up / down button to change the value data
To exit, press the {EXIT} button on the remote. You can also press the back button when you are in each category to get back to the main menu.
Adjustment of White Balance
1. Equipment
• MIK7255 or Pattern Generator
• CA-210 Display Color Analyzer
• Remote Control.
2. Pattern adjustment
• ADC Calibration : Mik pattern #240
• Auto-Calibration Mode ; 480p/60Hz
; 720p/60Hz
; 480i/60Hz
• White Balance adjustment pattern: Mik pattern #446
• Color coordinate adjustment Mode: 720p/60Hz(Component)
Composite NTSC
3. STEP1: ADC-Calibration
1) At 480p, do Auto-Calibration of ADC-cut off & Gain(1 ) on Mosaic pattern(ex Mik pattern #240)
2) At 720p/60Hz, repeat 1)
3) At 480i, repeat 1).
4. STEP2: Adjustment of White - Balance
1) At Component input 1. 720p/60Hz, adjust white Balance Mid , High ,Low at pattern Full white 70%
(Ex; Mik pattern #446)
2) At Composite NTSC, repeat 1)
3) White Balance coordination (enter White Balance in Factory Mode)
How to enter; TV/AV -> 0 -> 9 -> 1-> 7 (press buttons one at a time to enter factory mode)
-> ASI510 W/B -> Done (it shows R,G,B adjustment toolbar)
(1) Mid : x=0.283 , y=0.298 +/- 0.02 (9300k)
(2) High : x=0.276 , y=0.283 +/- 0.02 (11000k)
(3) Low : x=0.313 , y=0.329 +/- 0.02 (6500k)
42" Inch LCD Plasma Display
Press the {INPUT} button on the remote.
The input list will come up.
Then press the {0} {9} {1} {7} buttons on the remote.
Press channel up or down to select parameter.
Press volume up / down button to change the value data
To exit, press the {EXIT} button on the remote. You can also press the back button when you are in each category to get back to the main menu.
Adjustment of White Balance
1. Equipment
• MIK7255 or Pattern Generator
• CA-210 Display Color Analyzer
• Remote Control.
2. Pattern adjustment
• ADC Calibration : Mik pattern #240
• Auto-Calibration Mode ; 480p/60Hz
; 720p/60Hz
; 480i/60Hz
• White Balance adjustment pattern: Mik pattern #446
• Color coordinate adjustment Mode: 720p/60Hz(Component)
Composite NTSC
3. STEP1: ADC-Calibration
1) At 480p, do Auto-Calibration of ADC-cut off & Gain(1 ) on Mosaic pattern(ex Mik pattern #240)
2) At 720p/60Hz, repeat 1)
3) At 480i, repeat 1).
4. STEP2: Adjustment of White - Balance
1) At Component input 1. 720p/60Hz, adjust white Balance Mid , High ,Low at pattern Full white 70%
(Ex; Mik pattern #446)
2) At Composite NTSC, repeat 1)
3) White Balance coordination (enter White Balance in Factory Mode)
How to enter; TV/AV -> 0 -> 9 -> 1-> 7 (press buttons one at a time to enter factory mode)
-> ASI510 W/B -> Done (it shows R,G,B adjustment toolbar)
(1) Mid : x=0.283 , y=0.298 +/- 0.02 (9300k)
(2) High : x=0.276 , y=0.283 +/- 0.02 (11000k)
(3) Low : x=0.313 , y=0.329 +/- 0.02 (6500k)
Pioner PDP-4214 Service Menu
Photo credit : printablecolouringpages.co.uk