Panasonic TV Service Menu
Before you entering Panasonic TV factory mode to change any value on the factory service mode,
please write down all the original factory settings. tvservicemenu are
not responsibility for any damage, data error and unwanted effect after
using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.
PANASONIC PE77U
Press Volume down button, Hold down the button ON THE PLASMA TV.
Press three times the RECALL button on remote control.
The Service Menu mode / factory mode apear on the television screen.
To navigate main menu Use {1} {2} on remote control.
To navigate sub-menu Use {3} {4} on remote control items.
To change item value Use {VOL+} {VOL -} on remote control.
To save Turn off Power to exit service mode.
Service Menu Panasonic MX-3MX-3C
Simultaneously press 'RECALL' button on remote control and
'volume down' local. Exit: 'NORMAL' on remote control.
Service Menu Panasonic 1996
Old Panasonic TV's after 1996 can be set to "Factory Mode" with the following remote control sequence:
First, select the SET-UP icon and select CABLE mode then, select the TIMER icon and set the SLEEP timer for 30 second.
Press the ACTION button twice to open the menus.
Change program to channel 124.
Set the television volume to 0.
Press volume down button on the television panel and you will see the red CHK on the screen.
Service Menu Panasonic CT-G2159E
Turn on the Television and using the remote control to enter factory mode.
Step 1) Select the SET-UP in the main_menu and then select the CABLE mode.
Step 2) Set the timer sleep active 30 second.
Step 3) Press ACTION twice to exit the menu and tune program to the channel 124.
Step 4) Set the volume to 0, Press enter again then volume down.
service mode is CHK. To exit press ACTION and POWER simultaneously for two seconds.
Panasonic CT-215785
Factory codes for panasonic tv
Turn on the Television, short the circuit points FA1 - FA2. Press ACTION button or MENU button and
volume down simultaneously. Press POWER on the remote control to selec.
Panasonic TX-28W3E Service Mode
Adjust the bass to maximum, treble to minimum, press RESET on the remote control and while in the TV-VOL. Using the Teletext press RED and GREEN selects the item with Blue and Yellow line values.
Panasonic CT-Z1422 Service Mode
Simultaneously press the Volume down button on the TV and press 9 at the remote control for more than 1 second. With channel up or down select options with volume up
or down adjusts the value. To exit, press ACTION in the remote control
Panasonic MX-3 Service Mode
CTV Hotel Mode
ON: Press simultaneously 'OFF TIMER' on remote control and 'CH.UP' local.
OFF: Press simultaneously 'OFF TIMER' on remote control and 'VOL-' local.
Panasonic TAU Service Mode
With the TV on, adjust the volume to a minimum, put the key in OFF-ON TIMER.
Press RECALL on the remote control and simultaneously in the TV-VOL. With keys 1 and
2, selects nodes adjustment (CHK1, CHK2, ...) with the keys 3 and 4 selected items with volume down and volume up to adjusts the values.
Panasonic Plasma 3UY Service Mode
Press the volume down & hold down the button on the plasma TV display.
Press 3 times the STATUS button on the remote control.
Status button is the one below Power button
The Service mode will comes up on the screen.
To select a mode parameter use the cursors keys on the remote control.
And press the Action key {} to access the menu.
To exit mode Press the R button.
Panasonic TX-25W3E Service Mode
Increase the bass to maximum, decrease treble to minimum, press RESET on the remote control and while in the TV-volume. Using the Teletext press RED and GREEN selects the
item with Blue and Yellow line values. To store the new press STORE. To exit NORM (normalization).
Service Menu Panasonic EURO-2 Service Mode
CTV Service Mode
In Sound-Menu Low-tone-regel to maximum and
High-tone-regel to minimum. Press 'F' button on TV.
Then press VOL- on TV and REVEAL on remote control in
some time. Select press red and green buttons.
Adjust press yellow and blue buttons. Store press
'STR'. Exit press 'N' on remote control.
Panasonic TX-33AK10 Service Mode
Bass to max.
Treble to min.
Hold down "index"
Press "-" (minus) on the front of the set
Panasonic TX-29AK1 Service Mode
Increase Bass to maximum. Decrease Treble to minimum. Hold down "index" Press "-" (minus) on the TV panel.
This Procedure works on the PK1 series as well and will work on TX-33AK10 series.
Service Menu Panasonic MX-3C
CTV Hotel Mode
ON: Press simultaneously 'OFF TIMER' on remote control and 'Channel UP' local.
OFF: Press simultaneously 'OFF TIMER' on remote control and 'Volume down-'
Panasonic EURO-1 Service Mode
CTV Service Mode
In Sound-Menu Low-tone-regel to maximum and High-tone-regel to minimum. Press volume down on the TV and reset on remote control in some time. Select press red and green buttons. Adjust: yellow and blue buttons. Store press 'STORE'. Exit switch off the television.
Panasonic CT-215785 Service Mode
Turn on TV, short-circuit points FA1 - FA2. Press ACTION or MENU and Volume up simultaneously. Press POWER on the remote control to select sub menu of services. With Pro +/- to select the parameter, press Volume +/- to adjusts the value. To exit press POWER and ACTION (or MENU) simultaneously
2 or 3 seconds.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.
PANASONIC PE77U
Press Volume down button, Hold down the button ON THE PLASMA TV.
Press three times the RECALL button on remote control.
The Service Menu mode / factory mode apear on the television screen.
To navigate main menu Use {1} {2} on remote control.
To navigate sub-menu Use {3} {4} on remote control items.
To change item value Use {VOL+} {VOL -} on remote control.
To save Turn off Power to exit service mode.
Service Menu Panasonic MX-3MX-3C
Simultaneously press 'RECALL' button on remote control and
'volume down' local. Exit: 'NORMAL' on remote control.
Service Menu Panasonic 1996
Old Panasonic TV's after 1996 can be set to "Factory Mode" with the following remote control sequence:
First, select the SET-UP icon and select CABLE mode then, select the TIMER icon and set the SLEEP timer for 30 second.
Press the ACTION button twice to open the menus.
Change program to channel 124.
Set the television volume to 0.
Press volume down button on the television panel and you will see the red CHK on the screen.
Photo credit to healthsreal.com
Service Menu Panasonic CT-G2159E
Turn on the Television and using the remote control to enter factory mode.
Step 1) Select the SET-UP in the main_menu and then select the CABLE mode.
Step 2) Set the timer sleep active 30 second.
Step 3) Press ACTION twice to exit the menu and tune program to the channel 124.
Step 4) Set the volume to 0, Press enter again then volume down.
service mode is CHK. To exit press ACTION and POWER simultaneously for two seconds.
Panasonic CT-215785
Factory codes for panasonic tv
Turn on the Television, short the circuit points FA1 - FA2. Press ACTION button or MENU button and
volume down simultaneously. Press POWER on the remote control to selec.
Panasonic TX-28W3E Service Mode
Adjust the bass to maximum, treble to minimum, press RESET on the remote control and while in the TV-VOL. Using the Teletext press RED and GREEN selects the item with Blue and Yellow line values.
Panasonic CT-Z1422 Service Mode
Simultaneously press the Volume down button on the TV and press 9 at the remote control for more than 1 second. With channel up or down select options with volume up
or down adjusts the value. To exit, press ACTION in the remote control
Panasonic MX-3 Service Mode
CTV Hotel Mode
ON: Press simultaneously 'OFF TIMER' on remote control and 'CH.UP' local.
OFF: Press simultaneously 'OFF TIMER' on remote control and 'VOL-' local.
Panasonic TAU Service Mode
With the TV on, adjust the volume to a minimum, put the key in OFF-ON TIMER.
Press RECALL on the remote control and simultaneously in the TV-VOL. With keys 1 and
2, selects nodes adjustment (CHK1, CHK2, ...) with the keys 3 and 4 selected items with volume down and volume up to adjusts the values.
Panasonic Plasma 3UY Service Mode
Press the volume down & hold down the button on the plasma TV display.
Press 3 times the STATUS button on the remote control.
Status button is the one below Power button
The Service mode will comes up on the screen.
To select a mode parameter use the cursors keys on the remote control.
And press the Action key {} to access the menu.
To exit mode Press the R button.
Panasonic TX-25W3E Service Mode
Increase the bass to maximum, decrease treble to minimum, press RESET on the remote control and while in the TV-volume. Using the Teletext press RED and GREEN selects the
item with Blue and Yellow line values. To store the new press STORE. To exit NORM (normalization).
Service Menu Panasonic EURO-2 Service Mode
CTV Service Mode
In Sound-Menu Low-tone-regel to maximum and
High-tone-regel to minimum. Press 'F' button on TV.
Then press VOL- on TV and REVEAL on remote control in
some time. Select press red and green buttons.
Adjust press yellow and blue buttons. Store press
'STR'. Exit press 'N' on remote control.
Panasonic TX-33AK10 Service Mode
Bass to max.
Treble to min.
Hold down "index"
Press "-" (minus) on the front of the set
Panasonic TX-29AK1 Service Mode
Increase Bass to maximum. Decrease Treble to minimum. Hold down "index" Press "-" (minus) on the TV panel.
This Procedure works on the PK1 series as well and will work on TX-33AK10 series.
Service Menu Panasonic MX-3C
CTV Hotel Mode
ON: Press simultaneously 'OFF TIMER' on remote control and 'Channel UP' local.
OFF: Press simultaneously 'OFF TIMER' on remote control and 'Volume down-'
Panasonic EURO-1 Service Mode
CTV Service Mode
In Sound-Menu Low-tone-regel to maximum and High-tone-regel to minimum. Press volume down on the TV and reset on remote control in some time. Select press red and green buttons. Adjust: yellow and blue buttons. Store press 'STORE'. Exit switch off the television.
Panasonic CT-215785 Service Mode
Turn on TV, short-circuit points FA1 - FA2. Press ACTION or MENU and Volume up simultaneously. Press POWER on the remote control to select sub menu of services. With Pro +/- to select the parameter, press Volume +/- to adjusts the value. To exit press POWER and ACTION (or MENU) simultaneously
2 or 3 seconds.
PANASONIC
Year Company Formed: 1918 by Konosuke Matsushita
Country Based: Osaka, Japan
Started Selling TV’s: 1935
Format: Panasonic Plasma TV & Panasonic LCD TV
Price range: A premium product with premium design although cheaper models can be found once a new range is released.
Year Company Formed: 1918 by Konosuke Matsushita
Country Based: Osaka, Japan
Started Selling TV’s: 1935
Format: Panasonic Plasma TV & Panasonic LCD TV
Price range: A premium product with premium design although cheaper models can be found once a new range is released.