Polyvision TV Service Menu
Before you entering Polyvision factory mode to change any value on the factory service mode,
please write down all the original factory settings. tvservicemenu are
not responsibility for any damage, data error and unwanted effect after
using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
Switch on the telvision and press power key on the Polyvision remote control to switch of the television in the standby mode.
In the standby mode press menu button and hold the key until the factory mode aper on the screen, and enter the code 1013 to entering factory mode 1, to entering factory mode 2 you must insert the code 1014.
To select parameter use cursor up or down and change the value press volume +/-
To save the settings press menu and the red color stored text will shown for 2 secods.
To exit press power button.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
Photo by www.dailymail.co.uk
In the standby mode press menu button and hold the key until the factory mode aper on the screen, and enter the code 1013 to entering factory mode 1, to entering factory mode 2 you must insert the code 1014.
To select parameter use cursor up or down and change the value press volume +/-
To save the settings press menu and the red color stored text will shown for 2 secods.
To exit press power button.