Pacific PTV 5102 TV Service Menu
Pacific PTV 5102 TV Service mode
Before you entering Pacific PTV 5102 factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
Pacific PTV 5102 TV Service mode
Turn on the TV and make sure the screen and picture is normal.
Turn off the TV by press main switch. Put the pin 7 of microprocessor to ground.
Power-on tv:a S appear in the left down corner.
Remove the strap of pin 7.
Press OSD (or RECALL) button on remote control.
To select groupe parameters use channel down button
To save factory data settings use OSD(RECALL) button on remote control
To exit from factory mode, turn off the TV by pressing main switch.
Service adjustment default V1.1
AFC COARSE 05 06
AFC FINE 2C 2B
AFC COARSE LP 07 07
AFC FINE LP 40 40
CVBS AMP 10 10
AGC START 27 26
AGC GAIN 00 00
MANUAL C-O 00 00
R CUT-OFF 21 1F
G CUT-OFF 20 23
BRIGHTNESS 20 20
CONTRAST 20 20
R GAIN 19 38
G GAIN 13 36
B GAIN 11 33
BELL FILTER 00 00
APR THRESH 08 0B
HOR SHIFT 28 35
VERT AMP 39 31
TXT SHIFT 01 01
SYS OPTION 00 ( or 03 )
MENU OPTION 00 00
AFC ADJUST 00 00
AFC LP ADJ 00 00
Before you entering Pacific PTV 5102 factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
Pacific PTV 5102 TV Service mode
Turn on the TV and make sure the screen and picture is normal.
Turn off the TV by press main switch. Put the pin 7 of microprocessor to ground.
Power-on tv:a S appear in the left down corner.
Remove the strap of pin 7.
Press OSD (or RECALL) button on remote control.
To select groupe parameters use channel down button
To save factory data settings use OSD(RECALL) button on remote control
To exit from factory mode, turn off the TV by pressing main switch.
Photo by trend-kid.com
AFC COARSE 05 06
AFC FINE 2C 2B
AFC COARSE LP 07 07
AFC FINE LP 40 40
CVBS AMP 10 10
AGC START 27 26
AGC GAIN 00 00
MANUAL C-O 00 00
R CUT-OFF 21 1F
G CUT-OFF 20 23
BRIGHTNESS 20 20
CONTRAST 20 20
R GAIN 19 38
G GAIN 13 36
B GAIN 11 33
BELL FILTER 00 00
APR THRESH 08 0B
HOR SHIFT 28 35
VERT AMP 39 31
TXT SHIFT 01 01
SYS OPTION 00 ( or 03 )
MENU OPTION 00 00
AFC ADJUST 00 00
AFC LP ADJ 00 00