Telefunken 29TCT TV Service Menu
TELEFUNKEN 29TCT4010 TV Service mode for CHASSIS TTE 220 SCH
Before you entering Telefunken factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
Enter Telefunken TV factory mode
To enter factory mode; open the “OVERVIEW “ menu (keep the menu item cursor on the “Exit” item) and pres “ 1 9 2 3 ” .
1. SERViCE MENU İ :
· Sw version
· Setup
· Geometry
· Video
· Sound
· Pip Service
· EEPROM Reset
Service Version : It shows software version.
Setup : It includes CRT, OSD, TXT,Tuner,Scart, No Signal adjustmens-options.
Geometry : All geometry adjustments can be done via this menu.
Video : Video adjustments (white point,Black level etc.)
Sound : This submenu includes sound adjustmens and options like Prescale
values of FM,NICAM,Scart,LL’. Also tv systems can be choosen in this menu.
Pip Service : With this menu, Some Pip adjustmens can be done. Pip frame
color, frame width etc.
EEPROM Reset : This is used for reset the TV. All geometry, sound, setup,
pip values are set the default values.
2. Setup Menu :
· CRT Type
· Translucency
· TXT Language
· Main Tuner Selection
· Pip Tuner Selection
· Main Tuner AGC
· OSD Brightness
· TXT Brightness
· OSD Contrast
· TXT Contrast
· Scart3 Option
· SVHS Option
· No Signal Status
CRT Type :
Options : 16/9 Tube – 4/3 Tube
This item is for tube type selection.
Translucency :
Adjustments : 0 … 128 step.
This is related to OSD visibility. At 0, it is hardly visible, at 128 OSD is solid.
TXT Language
Options : East – West
This is Teletext language option.
Main Tuner Selection :
Option : orega – samsung – philips – alps
After replacing the main tuner with the new one listed above, this option must
be set.
Before you entering Telefunken factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
Telefunken 29TCT TV Service Menu
Photo credit : tuningpp.com
Enter Telefunken TV factory mode
To enter factory mode; open the “OVERVIEW “ menu (keep the menu item cursor on the “Exit” item) and pres “ 1 9 2 3 ” .
1. SERViCE MENU İ :
· Sw version
· Setup
· Geometry
· Video
· Sound
· Pip Service
· EEPROM Reset
Service Version : It shows software version.
Setup : It includes CRT, OSD, TXT,Tuner,Scart, No Signal adjustmens-options.
Geometry : All geometry adjustments can be done via this menu.
Video : Video adjustments (white point,Black level etc.)
Sound : This submenu includes sound adjustmens and options like Prescale
values of FM,NICAM,Scart,LL’. Also tv systems can be choosen in this menu.
Pip Service : With this menu, Some Pip adjustmens can be done. Pip frame
color, frame width etc.
EEPROM Reset : This is used for reset the TV. All geometry, sound, setup,
pip values are set the default values.
2. Setup Menu :
· CRT Type
· Translucency
· TXT Language
· Main Tuner Selection
· Pip Tuner Selection
· Main Tuner AGC
· OSD Brightness
· TXT Brightness
· OSD Contrast
· TXT Contrast
· Scart3 Option
· SVHS Option
· No Signal Status
CRT Type :
Options : 16/9 Tube – 4/3 Tube
This item is for tube type selection.
Translucency :
Adjustments : 0 … 128 step.
This is related to OSD visibility. At 0, it is hardly visible, at 128 OSD is solid.
TXT Language
Options : East – West
This is Teletext language option.
Main Tuner Selection :
Option : orega – samsung – philips – alps
After replacing the main tuner with the new one listed above, this option must
be set.