Akari Blue Beach TV Service Menu
AKARI BLUE BEACH
Akari use PTCS030201 ICs and LA76810 ICs,
Press menu button on the Akari Blue Beach TV panel and press SLEEP button on the remote control
To select parameter press channel up/down and to change the factory settings press volume up/down button.
Below the factory settings.
fm gain 0
de emphasis tc 0
fbp blk sw 0
Audio mute 0
FM mute 0
video mute 0
sound trap 4
bass opt no
cen spk opt no
osd H position 12
opt collor sys 1
opt sif sys 0
red drive 63
green drive 8
red bias 127
green bias 160blue bias 140
blue drive 63
Vsize/50mhz 58
Vsize/60mhz 90
Vsc 18
V pos/50mhz 10
V pos/60mhz 20
sub bright 80
Vlinearity 15
Vsize CMP 6
sub contrast 55
sub collor 63
sub tint 80
sub sharp 50
collor sya 2
C kill on 0
C kill off 0
sif sys sw 5,5
C ext 0
C bypass 0
H phase/60mhz 13
H blk L 2
H freq 20
H phase/50mhz 10
H blk R 5
blank def 0
coring enable 0
cross B/W 0
fm level 12
video level 6
syn kill 0
rf agc delay 18
V kill 0
digital osd 0
count down mod 0
gray mode 0
audio sw 0video sw 0
AKB def 1
auto fresh 0
vsync sep up 0
afc gain and gate 0
R-y/B-y gain bal 8
R-y/B-y angle 8
B gamma seleck 3
secam B-y dc 8
secam R-y dc 8
RG gamma def 0
brt abl def 1
brt abl treshold 0
brt mod stop def 0
killer sys 2
volume filter 0
Vif sys sw 38,9
emg abl def 1
disable 0vertikal tes 0
tint test 0
collor test 1
drive test 0
contrast test 0
osd contras test 0
AKB tes 0
Before you entering Akari Blue Beach factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.
Akari use PTCS030201 ICs and LA76810 ICs,
Press menu button on the Akari Blue Beach TV panel and press SLEEP button on the remote control
To select parameter press channel up/down and to change the factory settings press volume up/down button.
Below the factory settings.
fm gain 0
de emphasis tc 0
fbp blk sw 0
Audio mute 0
FM mute 0
video mute 0
sound trap 4
bass opt no
cen spk opt no
osd H position 12
opt collor sys 1
opt sif sys 0
red drive 63
green drive 8
red bias 127
green bias 160blue bias 140
blue drive 63
Vsize/50mhz 58
Vsize/60mhz 90
Vsc 18
V pos/50mhz 10
V pos/60mhz 20
Photo by www.noodleprincess.com
osd contrast 60
sub bright 80
Vlinearity 15
Vsize CMP 6
sub contrast 55
sub collor 63
sub tint 80
sub sharp 50
collor sya 2
C kill on 0
C kill off 0
sif sys sw 5,5
C ext 0
C bypass 0
H phase/60mhz 13
H blk L 2
H freq 20
H phase/50mhz 10
H blk R 5
blank def 0
coring enable 0
cross B/W 0
fm level 12
video level 6
syn kill 0
rf agc delay 18
V kill 0
digital osd 0
count down mod 0
gray mode 0
audio sw 0video sw 0
AKB def 1
auto fresh 0
vsync sep up 0
afc gain and gate 0
R-y/B-y gain bal 8
R-y/B-y angle 8
B gamma seleck 3
secam B-y dc 8
secam R-y dc 8
RG gamma def 0
brt abl def 1
brt abl treshold 0
brt mod stop def 0
killer sys 2
volume filter 0
Vif sys sw 38,9
emg abl def 1
disable 0vertikal tes 0
tint test 0
collor test 1
drive test 0
contrast test 0
osd contras test 0
AKB tes 0
Before you entering Akari Blue Beach factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.