Toshiba LCD 32HL67US TV Service modeSet television volume to 0 and press "MUTE" button twice on the Toshiba LCD remote control.
Press again "MUTE" button and hold the button, while holding the MUTE button, press MENU button on TV panel. Factory modewill open on the screen.
Select and adjusting factory data
To select parameter press channel up or channel down.
Pressing volume button will change the value of factory data in the range from 00H to FFH. The variable range depends on the adjusting item.
To save and exit from factory mode Press the POWER button to turn off the Toshiba LCD 32HL67US.
Photo by imgkid.com
Before you entering Toshiba LCD 32HL67US factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.