Hitachi 32PD5000 Plasma TV Service menu
This Service menu mode Applicable Model
Factory mode Adjustment
● How to get to Adjustment mode
Using the front control buttons with the set turned off (standby) can activate it.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for
more than 5 seconds.
The set turns on in adjustment mode with OSD.
● Changing data and Selecting Adjustment code
When the set is in adjustment mode, the cursor , , , and OK buttons of the remote control or front panel
may be used as the adjustment keys.
, buttons are used for selecting adjustment code.
, buttons are used for changing data values.
OK button is used for confirming the data.
After finishing the necessary adjustment press MENU button. Adjustment mode is released and the set returns to
normal condition.
● Memory Initialize operation
NOTE: The execution of this function returns the adjustment codes to the preset values, therefore, adjustment
data will be lost.
Procedure
(1) Enter Adjustment Mode.
(2) Select MEMORY INIT adjustment code (No.704) and change the data value from 0 to 1.
(3) Activate MEMORY INIT by pressing OK button for more than 3 seconds.
(4) Select No.374 and change data value from 1 to 0.
(5) Check that the receiving channel goes to AV1. Unit is set to preset values.
Applicable Model Hitachi 42PD5100, Hitachi 42PD5200, Hitachi 32PD5200,
(1) Set CRT COLOR ANALYZER at the center of the screen panel.
(1) Enter the service adjustment mode, and confirm that No.0(R), 1(G) and 2(B) are all 255. If the some
data are not, set to 255.
(2) Input the full-white raster signal to AV1 component terminal and select AV1.
Signal condition
480i component
Video level: 0.714Vp-p
Sync level: 0.286Vp-p
Setup level: 0V
(2) Adjust the color temperature by way that reduces the one or two data in No.0, 1 or 2.
(Note: At least one of them should be 255 after adjustment.)
<Specification>
Color Temperature (Cool) for Video
12000K x=0.268 0.005
y=0.283 0.005
(3) Set the display size to “Full”. [Adjustment of Normal mode]
(This item must be done before the same adjustment for PC mode.)
(3) Enter the service adjustment mode, and confirm that No.3(R), 4(G) and 5(B) are all 255. If the some
data are not, set to 255.
(4) Adjust the color temperature by way that reduces the one or two data in No.3, 4 or 5.
(Note: At least one of them should be 255 after adjustment.)
<Specification>
Color Temperature (Normal) for Video
9300K x=0.285 0.005
y=0.293 0.005
[Adjustment of Warm mode]
(5) Enter the service adjustment mode, and confirm that No.6(R), 7(G) and 8(B) are all 255. If the some
data are not, set to 255.
(6) Adjust the color temperature by way that reduces the one or two data in No.6, 7 or 8.
(Note: At least one of them should be 255 after adjustment.)
<Specification>
Color Temperature (Warm) for Video
6500K x=0.314 0.005
y=0.327 0.005
[Adjustment of Black / White mode]
(7) Enter the service adjustment mode, and confirm that No.9(R), 10(G) and 11(B) are all 255. If the
some data are not, set to 255.
(8) Adjust the color temperature by way that reduces the one or two data in No.9, 10 or 11.
(Note: At least one of them should be 255 after adjustment.)
Hitachi 32PD5100
Hitachi 32PD5200
Hitachi 32PD5300
Hitachi 32PD5100
Hitachi 32PD5200
Hitachi 32PD5300
Hitachi 42PD5000
Hitachi 37PD5200
Hitachi 42PMA500E
Hitachi 55PMA550E
Hitachi 55PD5200
Factory mode Adjustment
● How to get to Adjustment mode
Using the front control buttons with the set turned off (standby) can activate it.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for
more than 5 seconds.
The set turns on in adjustment mode with OSD.
● Changing data and Selecting Adjustment code
When the set is in adjustment mode, the cursor , , , and OK buttons of the remote control or front panel
may be used as the adjustment keys.
, buttons are used for selecting adjustment code.
, buttons are used for changing data values.
OK button is used for confirming the data.
After finishing the necessary adjustment press MENU button. Adjustment mode is released and the set returns to
normal condition.
● Memory Initialize operation
NOTE: The execution of this function returns the adjustment codes to the preset values, therefore, adjustment
data will be lost.
Procedure
(1) Enter Adjustment Mode.
(2) Select MEMORY INIT adjustment code (No.704) and change the data value from 0 to 1.
(3) Activate MEMORY INIT by pressing OK button for more than 3 seconds.
(4) Select No.374 and change data value from 1 to 0.
(5) Check that the receiving channel goes to AV1. Unit is set to preset values.
Applicable Model Hitachi 42PD5100, Hitachi 42PD5200, Hitachi 32PD5200,
(1) Set CRT COLOR ANALYZER at the center of the screen panel.
(1) Enter the service adjustment mode, and confirm that No.0(R), 1(G) and 2(B) are all 255. If the some
data are not, set to 255.
(2) Input the full-white raster signal to AV1 component terminal and select AV1.
Signal condition
480i component
Video level: 0.714Vp-p
Sync level: 0.286Vp-p
Setup level: 0V
(2) Adjust the color temperature by way that reduces the one or two data in No.0, 1 or 2.
(Note: At least one of them should be 255 after adjustment.)
<Specification>
Color Temperature (Cool) for Video
12000K x=0.268 0.005
y=0.283 0.005
(3) Set the display size to “Full”. [Adjustment of Normal mode]
(This item must be done before the same adjustment for PC mode.)
(3) Enter the service adjustment mode, and confirm that No.3(R), 4(G) and 5(B) are all 255. If the some
data are not, set to 255.
(4) Adjust the color temperature by way that reduces the one or two data in No.3, 4 or 5.
(Note: At least one of them should be 255 after adjustment.)
<Specification>
Color Temperature (Normal) for Video
9300K x=0.285 0.005
y=0.293 0.005
[Adjustment of Warm mode]
(5) Enter the service adjustment mode, and confirm that No.6(R), 7(G) and 8(B) are all 255. If the some
data are not, set to 255.
(6) Adjust the color temperature by way that reduces the one or two data in No.6, 7 or 8.
(Note: At least one of them should be 255 after adjustment.)
<Specification>
Color Temperature (Warm) for Video
6500K x=0.314 0.005
y=0.327 0.005
[Adjustment of Black / White mode]
(7) Enter the service adjustment mode, and confirm that No.9(R), 10(G) and 11(B) are all 255. If the
some data are not, set to 255.
(8) Adjust the color temperature by way that reduces the one or two data in No.9, 10 or 11.
(Note: At least one of them should be 255 after adjustment.)
Hitachi 32PD5000 Plasma TV Service menu
Photo credit : decozt.com