Before you entering Panasonic factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
Panasonic CT-G2159E TV Service mode
Turn on TV and using the remote control.
Step 1) Select the SET-UP in the main menu and then select the mode CABLE the option ANTENA.
Step 2) Select TIMER icon and set the timer sleep active 30 second.
Step 3) Press ACTION twice to exit the menu and tune to the channel at 124.
Step 4) Adjust the volume to minimum, Press enter again then volume down.
service mode is CHK. To exit press ACTION and POWER simultaneously for two seconds.
Photo credit : homecalm.com