Akira CRT TV service Menu list
AKIRA UOC 9370 service menu-mode
Key location Steps to enter into the Factory Mode
Press "QV" key for 4 seconds and release the key
Press and release "MENU" key
http://tvservicemenu.blogspot.com/2009/03/akira-uoc-9370.html
user remote 1) Press and release key "CLOCK"
user remote 2) Press and release key "P.M."
user remote 3) Press and release key " "
http://tvservicemenu.blogspot.com/2009/04/akira-5p60.html
Factory remote 1) Press and release FACTORY key
Convert the user remote con to the Factory remote
user remote 1) Connect IC pin14 & pin17 through a jiggle switch
MI Item Range Default value MI Item Range Default
50HZ 60HZ M6 OSO 0/1 0
M1 V.SLOPE 0~63 31 31 AGC SPEED 0~2 1
http://tvservicemenu.blogspot.com/2009/04/akira-5n11.html
"RECALL"
user remote 2) Press and hold key "V-"
user remote 3) After volume=0, press key "RECALL"
user remote 4) Repeat 3 times
http://tvservicemenu.blogspot.com/2009/03/akira-1421s01.html
Press and release key "1"
Press and release key "2"
If CH position is not at 12, retry from step1
Press and release key "3"
Press and release key "8"
If CH position is not at 38, retry from step1
http://tvservicemenu.blogspot.com/2009/03/akira-tb1238.html
user remote 2) Press and release key "2"
user remote 3) If CH position is not at 12, retry from step1
user remote 4) Press and release key "5"
user remote 5) Press and release key "1"
http://tvservicemenu.blogspot.com/2009/03/akira-tb1251.html
AKIRA 8821 service mode.
Press and hold volume down button to set the tv volume to 0.
After the volume set to 0, press "DISPLAY" button on the remote control.
To select parameter press ch +/-
http://tvservicemenu.blogspot.com/2009/03/akira-8821.html
Key location Steps to enter into the Factory Mode
Press "QV" key for 4 seconds and release the key
Press and release "MENU" key
http://tvservicemenu.blogspot.com/2009/03/akira-uoc-9370.html
Photo by www.123rf.com
user remote 1) Press and release key "CLOCK"
user remote 2) Press and release key "P.M."
user remote 3) Press and release key " "
http://tvservicemenu.blogspot.com/2009/04/akira-5p60.html
Factory remote 1) Press and release FACTORY key
Convert the user remote con to the Factory remote
user remote 1) Connect IC pin14 & pin17 through a jiggle switch
MI Item Range Default value MI Item Range Default
50HZ 60HZ M6 OSO 0/1 0
M1 V.SLOPE 0~63 31 31 AGC SPEED 0~2 1
http://tvservicemenu.blogspot.com/2009/04/akira-5n11.html
"RECALL"
user remote 2) Press and hold key "V-"
user remote 3) After volume=0, press key "RECALL"
user remote 4) Repeat 3 times
http://tvservicemenu.blogspot.com/2009/03/akira-1421s01.html
Press and release key "1"
Press and release key "2"
If CH position is not at 12, retry from step1
Press and release key "3"
Press and release key "8"
If CH position is not at 38, retry from step1
http://tvservicemenu.blogspot.com/2009/03/akira-tb1238.html
user remote 2) Press and release key "2"
user remote 3) If CH position is not at 12, retry from step1
user remote 4) Press and release key "5"
user remote 5) Press and release key "1"
http://tvservicemenu.blogspot.com/2009/03/akira-tb1251.html
AKIRA 8821 service mode.
Press and hold volume down button to set the tv volume to 0.
After the volume set to 0, press "DISPLAY" button on the remote control.
To select parameter press ch +/-
http://tvservicemenu.blogspot.com/2009/03/akira-8821.html