Before you entering Akira factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.
AKIRA 5N11 TV Service mode
Factory remote 1) Press and release FACTORY key
Convert the user remote con to the Factory remote
user remote 1) Connect IC pin14 & pin17 through a jiggle switch
MI Item Range Default value MI Item Range Default
50HZ 60HZ M6 OSO 0/1 0
M1 V.SLOPE 0~63 31 31 AGC SPEED 0~2 1
V.SHIFT 0~63 33 33 FFI 0/1 0
V.SIZE 0~63 37 37 FSL 0/1 0
V.SC 0~63 24 24 FMWS 0/1 0
H.SHIFT 0~63 29 40 HP2 0/1 0
OSD.V.POS 0~63 20 9 RPO 0~3 1
OSD.H.POS 0~63 8 6
PROGRAM NO. M7 COOL BO OFFSEF 0~32 16
WARM BO OFFSET 0~32 16
M2 AGC 0~63 22 STANDARD BRI 0~63 48
WIDE 0~63 0 STANDARD CON 0~63 48
MAX ZOOM 0~63 50 STANDARD COL 0~63 32
SEARCH SPEED 0~3 1 SHARP BRI 0~63 48
SHIPPING 0 SHARP CON 0~63 63
SHARP COL 0~63 32
M3 BT 0~63 48 SOFT BRI 0~63 32
CT 0~63 48 SOFT CON 0~63 32
RB 0~63 31 SOFT COL 0~63 32
GB 0~63 31 M8 AV MODE 0~6 3
RD 0~63 40 FM GAIN 0~63 63
GD 0~63 40 Y DELAY PAL 0~15 9
BD 0~63 40 Y DELAY NTSC 0~15 9
SB 0~63 30 Y DELAY AV 0~15 9
SC BRIGHTNESS 0~63 55
M4 SUB CONTRAST 0~63 63 CATHODE LEVEL 0~15 1
SUB COLOR 0~63 63 BAND MODE 0/1 1
SUB SHARPNESS 0~63 31 START ON 0/1 1
SUB TINT 0~63 31 RF AMP 0/1 0
HEADPHONE 0/1 0
M5 IF 38.9M SRS 0
6.5M 0/1 0 M9 LOGO OPTION 0/1 5
6.0M 0/1 1 *LOGO ---------- AKIRA
5.5M 0/1 1 ROW POSITION 0~12 6
4.5M 0/1 0 COLUMN POSITION 0~12 2
SIF PRIORITY 5.5M COLOR 0~6 0
AV NOLY 0/1 0 START TIME 6~12 10
Photo credit : rejigdesign.com
AKIRA 5N11 TV Service Menu (All TV Service Menu Code)
5
stars -
"AKIRA 5N11 TV Service Menu"
by Admin 2
Factory remote 1) Press and release FACTORY key
Convert the user remote con to the Factory remote Written on April 02, 2009