Akira CRT TV service Menu list

AKIRA UOC 9370 service menu-mode
Key location Steps to enter into the Factory Mode
Press  "QV" key for 4 seconds and release the key
Press and release "MENU" key
http://tvservicemenu.blogspot.com/2009/03/akira-uoc-9370.html

Photo by www.123rf.com

user remote 1) Press and release key "CLOCK"
user remote 2) Press and release key "P.M."
user remote 3) Press and release key " "
http://tvservicemenu.blogspot.com/2009/04/akira-5p60.html

Factory remote 1) Press and release FACTORY key
Convert the user remote con to the Factory remote
user remote 1) Connect IC pin14 & pin17 through a jiggle switch
MI Item Range Default value MI Item Range Default
50HZ 60HZ M6 OSO 0/1 0
M1 V.SLOPE 0~63 31 31 AGC SPEED 0~2 1
http://tvservicemenu.blogspot.com/2009/04/akira-5n11.html

"RECALL"
user remote 2) Press and hold key "V-"
user remote 3) After volume=0, press key "RECALL"
user remote 4) Repeat 3 times
http://tvservicemenu.blogspot.com/2009/03/akira-1421s01.html

Press and release key "1"
Press and release key "2"
If CH position is not at 12, retry from step1
Press and release key "3"
Press and release key "8"
If CH position is not at 38, retry from step1
http://tvservicemenu.blogspot.com/2009/03/akira-tb1238.html

user remote 2) Press and release key "2"
user remote 3) If CH position is not at 12, retry from step1
user remote 4) Press and release key "5"
user remote 5) Press and release key "1"
http://tvservicemenu.blogspot.com/2009/03/akira-tb1251.html

AKIRA 8821 service mode.
Press and hold volume down button to set the tv volume to 0.
After the volume set to 0, press "DISPLAY" button on the remote control.
To select parameter press ch +/-
http://tvservicemenu.blogspot.com/2009/03/akira-8821.html

Akira LCD TV Service menu

Akira LCD TV Service menu / Factory Mode.
The method of Entering into Akira LCD TV Factory Mode.

Before you entering Akira LCD (Liquid Crystal Display) factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.

Akira LCD TV Service menu

Photo credit : www.yumbid.com

# Set the volume to 0, press down the key of "mute" in remote control.
# Press "Menu" button in your Akira LCD remote control.
# Press channel up or channel down to select items you need to adjust.
# Press the volume up or volume down to adjust (change) the value.
# Press the osd button in remote control, you should turn on the television again.

Akira 5N11 CT-29N-19 TV Service menu

Akira 5N11 CT-29N-19 Service mode

Press the volume down and volume up simultaneously on the TV is off and then hold the button and turn on the television.

Factory mode will open for you, arrangements must be careful and there should be no mistake, if there is a mistake entering the data will be damaged tv system.
Always remember to record the system data before
make further arrangements.

French
Akira 5N11 CT-29N-19 Mode service
Appuyez simultanément sur le volume vers le bas et le volume vers le haut sur le téléviseur, puis maintenez le bouton enfoncé et allumez le téléviseur.
Le mode d'usine s'ouvrira pour vous, les dispositions doivent être prudentes et il ne devrait pas y avoir d'erreur, s'il y a une erreur lors de la saisie des données, le système de télévision sera endommagé.
N'oubliez pas d'enregistrer les données du système avant
prendre d'autres dispositions.

Polish
Akira 5N11 CT-29N-19 Tryb serwisowy
Naciśnij jednocześnie przycisk zmniejszania i zwiększania głośności, gdy telewizor jest wyłączony, a następnie przytrzymaj przycisk i włącz telewizor.
Tryb fabryczny otworzy się dla ciebie, ustalenia muszą być ostrożne i nie powinno być pomyłki, jeśli wystąpi błąd podczas wprowadzania danych, nastąpi uszkodzenie systemu telewizyjnego.
Zawsze pamiętaj, aby wcześniej zapisać dane systemowe
dokonać dalszych ustaleń.

Akira 5N11 CT-29N-19 TV Service menu

Photo credit : owoto.com

Akira TV CT29XG9A TV Service menu

Akira TV CT29XG9A service mode
Press the BC [+] and the two voices.
select press the up and down the program, change the value press the up and down vote.
Always record the data before you change the value system to avoid damage to the television system.

Before you entering Akira TV CT29XG9A factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.

Akira TV CT29XG9A TV Service menu

Photo credit : piotton.com

AKIRA UOC 9381 TV Service menu

AKIRA UOC 9381 Service Menu

Key location Steps to enter into the Factory Mode
user remote 1) Press and release key "MENU"
user remote 2) Press and release key "8"
user remote 3) Press and release key "5"
user remote 4) Press and release key "0"
user remote 5) Press and release key "0"
Success - "M" displayed


Press channel up/down to select parameters
Press volume up/down to change the data value

AKIRA UOC 9381 TV Service menu

Photo credit : printablecolouringpages.co.uk

AKIRA 5N11 TV Service Menu

AKIRA 5N11 TV Service mode
Before you entering Akira factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.

AKIRA 5N11 TV Service mode
Factory remote 1) Press and release FACTORY key
Convert the user remote con to the Factory remote
user remote 1) Connect IC pin14 & pin17 through a jiggle switch
MI Item Range Default value MI Item Range Default
50HZ 60HZ M6 OSO 0/1 0
M1 V.SLOPE 0~63 31 31 AGC SPEED 0~2 1
V.SHIFT 0~63 33 33 FFI 0/1 0
V.SIZE 0~63 37 37 FSL 0/1 0
V.SC 0~63 24 24 FMWS 0/1 0
H.SHIFT 0~63 29 40 HP2 0/1 0
OSD.V.POS 0~63 20 9 RPO 0~3 1
OSD.H.POS 0~63 8 6
PROGRAM NO. M7 COOL BO OFFSEF 0~32 16
WARM BO OFFSET 0~32 16
M2 AGC 0~63 22 STANDARD BRI 0~63 48
WIDE 0~63 0 STANDARD CON 0~63 48
MAX ZOOM 0~63 50 STANDARD COL 0~63 32
SEARCH SPEED 0~3 1 SHARP BRI 0~63 48
SHIPPING 0 SHARP CON 0~63 63
SHARP COL 0~63 32
M3 BT 0~63 48 SOFT BRI 0~63 32
CT 0~63 48 SOFT CON 0~63 32
RB 0~63 31 SOFT COL 0~63 32
GB 0~63 31 M8 AV MODE 0~6 3
RD 0~63 40 FM GAIN 0~63 63
GD 0~63 40 Y DELAY PAL 0~15 9
BD 0~63 40 Y DELAY NTSC 0~15 9
SB 0~63 30 Y DELAY AV 0~15 9
SC BRIGHTNESS 0~63 55
M4 SUB CONTRAST 0~63 63 CATHODE LEVEL 0~15 1
SUB COLOR 0~63 63 BAND MODE 0/1 1
SUB SHARPNESS 0~63 31 START ON 0/1 1
SUB TINT 0~63 31 RF AMP 0/1 0
HEADPHONE 0/1 0
M5 IF 38.9M SRS 0
6.5M 0/1 0 M9 LOGO OPTION 0/1 5
6.0M 0/1 1 *LOGO ---------- AKIRA
5.5M 0/1 1 ROW POSITION 0~12 6
4.5M 0/1 0 COLUMN POSITION 0~12 2
SIF PRIORITY 5.5M COLOR 0~6 0
AV NOLY 0/1 0 START TIME 6~12 10

AKIRA 5N11 TV Service Menu

Photo credit : rejigdesign.com

AKIRA 5P60 TV Service Menu

AKIRA 5P60 TV Service mode
Before you entering Akira factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.

AKIRA 5P60 TV Service mode
user remote 1) Press and release key "CLOCK"
user remote 2) Press and release key "P.M."
user remote 3) Press and release key " "
user remote 4) To exit, press and release key "MENU"
Service menu Code

AKIRA 5P60 TV Service Menu

Photo credit : rejigdesign.com

AKIRA 14/21S01 TV Service Menu

AKIRA 14/21S01 TV Service mode
Before you entering Akira factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.

AKIRA 14/21S01 TV Service mode
user remote 1) Press and release key "RECALL"
user remote 2) Press and hold key "V-"
user remote 3) After volume=0, press key "RECALL"
user remote 4) Repeat 3 times
Service menu Code

AKIRA 14/21S01 TV Service Menu

Photo credit : renewdevco.com

AKIRA 3Y11 TV Service Menu

AKIRA 3Y11 TV Service mode
Before you entering Akira factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.

AKIRA 3Y11 TV Service mode
Key location Steps to enter into the Factory Mode
Press and release key "MENU"
Press and release key "Q. VIEW"
Press and release key "MUTE"
Factory mode will apear on the screen. Press prgoram up or program down to select the parameter and use the volume buton to change the  value.
To save the settings
PRODUCT NOTICE
Many electrical and mechanical components in this chassis have special safety-related characteristics.
These characteristics are often passed unnoticed by a visual inspection and the X-ray radiation protection afforded by them cannot necessary be obtained by using replacements rated at higher voltages or wattage, etc. Components which have these special safety characteristics in this manual and its supplements are identified by the international hazard symbols in the circuit diagram and part list. Before replacing any of these components read the parts list in this manual carefully. Substitute replacement components which do not have the same safety characteristics as specified in the parts list may create X-ray radiation.

AKIRA 3Y11 TV Service Menu

Photo credit : renewdevco.com

AKIRA TB1238 TV Service Menu

Akira TV TB1238 14RBS3 & 21BSS3W

Press the numbers one and two to go to a twelve channel and press again the number three and eight to go to thirty-eight channels, then press menu, menu lock and press mute and then enter the numbers one, two, three, and eight.
Factory mode will open and you are ready to make further arrangements.

Before you entering Akira TV TB1238 14RBS3 & 21BSS3W factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.

Akira TV TB1238 TV Service menu

Photo credit : phukienamthanh.com

AKIRA TB1251 TV Service menu

AKIRA TB1251 TV Service mode
Before you entering Akira factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.

AKIRA TB1251 TV Service mode
Key location Steps to enter into the Factory Mode
user remote 1) Press and release key "1"
user remote 2) Press and release key "2"
user remote 3) If CH position is not at 12, retry from step1
user remote 4) Press and release key "5"
user remote 5) Press and release key "1"
user remote 6) If CH position is not at 51, retry from step1
user remote 7) Press the MENU key to the MENU menu, selectthe LIMIT item and press the volume up key to enter into the LIMIT menu
user remote 8) Press and release the mute key
user remote 9) Input the password "1","2","5","1"

AKIRA TB1251 TV Service menu

Photo credit : renewdevco.com

AKIRA UOC 9370 TV Service Menu

AKIRA UOC 9370 service menu-mode
Before you entering Akira factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.

AKIRA UOC 9370 service menu-mode
Key location Steps to enter into the Factory Mode
Press  "QV" key for 4 seconds and release the key
Press and release "MENU" key

Input the password "6","4","8","3"
To enter into, "MENU-M4~M9" enter "828"
To select use channel up or channel down key.
To change the value press volume key.

AKIRA UOC 9370 TV Service Menu

Photo credit : richmaninteriors.blogspot.com

AKIRA 8821 TV Service Menu

Steps to enter into the AKIRA 8821 Factory Mode
Before you entering Akira factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.

AKIRA 8821 service mode.
Press and hold volume down button to set the tv volume to 0.
After the volume set to 0, press "DISPLAY" button on the remote control.
To select parameter press ch +/-
To change the value use the volume button.
To exit, press "DISPLAY" button

AKIRA 8821 TV Service Menu

Photo credit : room-decorating-ideas.com