Before you entering Akira factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.
AKIRA 3Y11 TV Service mode
Key location Steps to enter into the Factory Mode
Press and release key "MENU"
Press and release key "Q. VIEW"
Press and release key "MUTE"
Factory mode will apear on the screen. Press prgoram up or program down to select the parameter and use the volume buton to change the value.
To save the settings
Many electrical and mechanical components in this chassis have special safety-related characteristics.
These characteristics are often passed unnoticed by a visual inspection and the X-ray radiation protection afforded by them cannot necessary be obtained by using replacements rated at higher voltages or wattage, etc. Components which have these special safety characteristics in this manual and its supplements are identified by the international hazard symbols in the circuit diagram and part list. Before replacing any of these components read the parts list in this manual carefully. Substitute replacement components which do not have the same safety characteristics as specified in the parts list may create X-ray radiation.
Photo credit : renewdevco.com