LG LCD TV RM-20LA66K CHASSIS : ML-041B
1. Application Object
This instruction is for the application to the LCD TV.
2. Adjustment
2.1 Adjustment overview The unit is set to automatically adjust using the
factory automation equipment. However when errors occur, it should be adjusted manually.
2.2 Auto Gain/Offset adjustment
2.2.1 RF Mode adjustment
2.2.1.1 Adjustment preparation Conduct Heat Run at the RF fog signals for more than 30 minutes.
2.2.1.2 Auto Gain/Offset adjustment, Press IN-START Key to convert to the adjustment mode using the adjustment (SVC) remote controller, and press VOL+ Key at the Auto Gain menu.
(In case of RM-20LA70, press IN-START Key twice) Once the adjustment is completed, press the Enter
Key to save and finish the adjustment.
2.2.2 Component Mode adjustment
2.2.2.1 Adjustment preparation
LG RM-20LA66K LCD TV Service menu
Photo credit : wikimedia.org
Conduct Heat Run at the RF fog signals for more than 30 minutes.
Connect the Pattern Generator to the Component Jack (Y, Pb, Pr) of LCD TV.
2.2.2.2 Auto Gain/Offset adjustment Convert the input mode to the component input.
Using the Pattern Generator (801GF, VG819) adjust 480P for resolution and Color Bar
signals for patterns. Or adjust Color Bar signals in accordance with VG819.
Press the IN-START Key to convert into the adjustment mode using the adjustment (SVC) remote
controller, and press VOL+ Key at the Auto Gain menu.
Once the adjustment is completed, press the Enter Key to save and finish the adjustment
Universal Remote - Service Mode - TV Factory menu codes
You are reading LG RM-20LA66K LCD TV Service menu. Bookmark the LG RM-20LA66K LCD TV Service menu page to your favorite.
https://tvservicemenu.blogspot.com/2015/05/lg-rm-20la66k-lcd-tv-service-menu.html.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
LG RM-20LA66K LCD TV Service menu (All TV Service Menu Code)
5
stars -
"LG RM-20LA66K LCD TV Service menu"
by Admin 2
LG RM-20LA66K LCD TV Service menu mode, LG LCD TV RM-20LA66K CHASSIS : ML-041B factory mode Written on May 24, 2015