NEC PX-61XM1A TV Service Menu
This NEC PX-61XM1A TV service menu may use for
Screen Settings Menu
Adjusting the Position, Size, Fine Picture, Picture Adj
The position of the image can be adjusted and flickering of the image can be corrected.
Example: Adjusting the vertical position in the normal mode.
Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then...
1. Use the CH up and CH down buttons to select “SCREEN”, then press the PROCEED button. The “SCREEN” menu
appears.
Default settings (when RGB/PC is selected)
* The settings on the SCREEN menu are not preset at the factory.
To select a mode ...
Use the V- and V+ buttons to select a mode.
The mode switches as follows when the V- and V+ buttons are pressed:
→ NORMAL ↔ FULL ←
* The mode can also be switched by pressing the “WIDE” button on the remote control.
2. To adjust the vertical position ... Use the and buttons to select “V-POSITION”.
3. Adjust using the V- and V+ buttons.
* If neither the V- or V+ button is pressed within 5 seconds, the current setting is set and the previous screen reappears.
4. Once all adjustments are completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
Information Adjusting the Auto Picture
ON................... The Picture ADJ and Fine Picture adjustments are made automatically.
OFF ................. The Picture ADJ and Fine Picture adjustments are made manually.
Adjusting the position of the image V-POSITION ... Adjusts the vertical position of the image.
H-POSITION ... Adjusts the horizontal position of the image.
V-HEIGHT ....... Adjusts the vertical size of the image.
(Except for STADIUM mode)
H-WIDTH .........Adjusts the horizontal size of the image. (Except for STADIUM mode)
FINE PICTURE* .. Adjusts for flickering.
PICTURE ADJ* .... Adjusts for striped patterns on the image.
* The Picture ADJ and Fine Picture features are available only when the “Auto Picture” is off.
* The AUTO PICTURE, FINE PICTURE and PICTURE
ADJ. are not available for VIDEO and HD/ DVD source.
Restoring the factory default settings
Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults
except for Auto Picture.
Function Settings Menu
Setting the on-screen menu
When using the monitor for presentations, etc., the monitor can be set so that the input source, screen mode, etc., do not appear.
1. Use the CH up and CH down buttons to select “FUNCTION”, then press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the CH up and CH down buttons to select “OSM”.
3. To turn the on-screen menu mode off ...
Use the and buttons to select “OFF”.
The mode switches as follows each time the or button is pressed: ON ↔ OFF
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
Information
OSM modes
ON................... The on-screen menu appears.
OFF ................. The on-screen menu does not appear.
Restoring the factory default settings
Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.
Adjusting the position of the menu display
Use these operations to adjust the position of the menus that appear on the screen.
Example: Adjusting the position of the menu display Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the CH up and CH down buttons to select “FUNCTION”, then press the PROCEED button.
The “FUNCTION” menu appears.
2. Use the CH up and CH down buttons to select “OSM ADJ.”
4. Once all adjustments are completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
Setting the power management for computer images This energy-saving (power management) function
automatically reduces the monitor’s power consumption if no operation is performed for a certain amount of time.
Example: Turning the power management function on Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the CH up and CH down buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the CH up and CH down buttons to select “POWER MGT”.
3. To turn the power management function on ...
Use the V- and V+ buttons to select “ON”.
The mode switches as follows each time the or button is pressed: ON ↔ OFF
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
Information
Power management function
* The power management function automatically reduces the monitor’s power consumption if the computer’s
keyboard or mouse is not operated for a certain amount of time. This function can be used when using the
monitor with a computer conforming to the VESA DPMS format.
* If the computer’s power is not turned on or if the computer and selector tuner are not properly connected,
the system is set to the off state.
* For instructions on using the computer’s power management function, refer to the computer’s operating
instructions.
Power management settings
ON................... In this mode the power management function is turned on.
OFF ................. In this mode the power management function is turned off.
Power management function and POWER/STANDBY indicator
The POWER/STANDBY indicator indicates the status of the power management function. See page 29 for
indicator status and description.
Restoring the factory default settings
Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.
Marantz PD6120D
NEC PX-61XM1G
NEC PX-61XM1U-S1
Screen Settings Menu
Adjusting the Position, Size, Fine Picture, Picture Adj
The position of the image can be adjusted and flickering of the image can be corrected.
Example: Adjusting the vertical position in the normal mode.
Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then...
1. Use the CH up and CH down buttons to select “SCREEN”, then press the PROCEED button. The “SCREEN” menu
appears.
Default settings (when RGB/PC is selected)
* The settings on the SCREEN menu are not preset at the factory.
To select a mode ...
Use the V- and V+ buttons to select a mode.
The mode switches as follows when the V- and V+ buttons are pressed:
→ NORMAL ↔ FULL ←
* The mode can also be switched by pressing the “WIDE” button on the remote control.
2. To adjust the vertical position ... Use the and buttons to select “V-POSITION”.
3. Adjust using the V- and V+ buttons.
* If neither the V- or V+ button is pressed within 5 seconds, the current setting is set and the previous screen reappears.
Marantz PD6120D TV Service menu
Photo credit : ecozer.com
4. Once all adjustments are completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
Information Adjusting the Auto Picture
ON................... The Picture ADJ and Fine Picture adjustments are made automatically.
OFF ................. The Picture ADJ and Fine Picture adjustments are made manually.
Adjusting the position of the image V-POSITION ... Adjusts the vertical position of the image.
H-POSITION ... Adjusts the horizontal position of the image.
V-HEIGHT ....... Adjusts the vertical size of the image.
(Except for STADIUM mode)
H-WIDTH .........Adjusts the horizontal size of the image. (Except for STADIUM mode)
FINE PICTURE* .. Adjusts for flickering.
PICTURE ADJ* .... Adjusts for striped patterns on the image.
* The Picture ADJ and Fine Picture features are available only when the “Auto Picture” is off.
* The AUTO PICTURE, FINE PICTURE and PICTURE
ADJ. are not available for VIDEO and HD/ DVD source.
Restoring the factory default settings
Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults
except for Auto Picture.
Function Settings Menu
Setting the on-screen menu
When using the monitor for presentations, etc., the monitor can be set so that the input source, screen mode, etc., do not appear.
1. Use the CH up and CH down buttons to select “FUNCTION”, then press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the CH up and CH down buttons to select “OSM”.
3. To turn the on-screen menu mode off ...
Use the and buttons to select “OFF”.
The mode switches as follows each time the or button is pressed: ON ↔ OFF
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
Information
OSM modes
ON................... The on-screen menu appears.
OFF ................. The on-screen menu does not appear.
Restoring the factory default settings
Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.
Adjusting the position of the menu display
Use these operations to adjust the position of the menus that appear on the screen.
Example: Adjusting the position of the menu display Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the CH up and CH down buttons to select “FUNCTION”, then press the PROCEED button.
The “FUNCTION” menu appears.
2. Use the CH up and CH down buttons to select “OSM ADJ.”
4. Once all adjustments are completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
Setting the power management for computer images This energy-saving (power management) function
automatically reduces the monitor’s power consumption if no operation is performed for a certain amount of time.
Example: Turning the power management function on Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the CH up and CH down buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the CH up and CH down buttons to select “POWER MGT”.
3. To turn the power management function on ...
Use the V- and V+ buttons to select “ON”.
The mode switches as follows each time the or button is pressed: ON ↔ OFF
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
Information
Power management function
* The power management function automatically reduces the monitor’s power consumption if the computer’s
keyboard or mouse is not operated for a certain amount of time. This function can be used when using the
monitor with a computer conforming to the VESA DPMS format.
* If the computer’s power is not turned on or if the computer and selector tuner are not properly connected,
the system is set to the off state.
* For instructions on using the computer’s power management function, refer to the computer’s operating
instructions.
Power management settings
ON................... In this mode the power management function is turned on.
OFF ................. In this mode the power management function is turned off.
Power management function and POWER/STANDBY indicator
The POWER/STANDBY indicator indicates the status of the power management function. See page 29 for
indicator status and description.
Restoring the factory default settings
Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.