Factory Menu Access:
Press and hold the {SELECT} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
The Factory Menu will be displayed.
Service Menu Access:
Press and hold the {MENU} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
The Service Menu will be displayed.
Use the {UP} {DOWN} {LEFT} {RIGHT} buttons to move through menus and change values.
To exit, turn the Sanyo Projector Off.
Before you entering sanyo factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.
Sanyo Projectors TV Service Menu
Photo credit : nutridepot.net
Universal Remote - Service Mode - TV Factory menu codes
You are reading Sanyo Projectors TV Service Menu. Bookmark the Sanyo Projectors TV Service Menu page to your favorite.
https://tvservicemenu.blogspot.com/2009/12/projectors-tv-sanyo.html.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
Sanyo Projectors TV Service Menu (All TV Service Menu Code)
5
stars -
" Sanyo Projectors TV Service Menu"
by Admin 2
Sanyo Projectors TV Service Menu mode, Sanyo Projectors TV factory mode Written on December 08, 2009