Brandt TX91 TV Service Menu

Brandt TV chassis model TX91, TX91G TV Service Mode
Brand TV in stby mode, shut off TV with main switch. Press VT button on remote control and hold the key, switch on TV with main switch. Released VT button and press VT buton again.
Service menu mode load in 0.1 seconds, change and select press program and volume button on remote control.

Brandt TV chassis model TX91, TX91G TV Service Mode
Before you entering Brandt TX91 factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.

Photo by everydaylife.globalpost.com

Brandt 70172 TV Service Menu

Brandt 70172 TV Service mode
Brandt TV Model 70172 chassis TX-807 and ITC-008
Black & Diamond BDS1451UK TV Service mode
Before you entering Brandt 70172 factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.

TV in standby mode, shut off TV using main switch button / no electric activity in your television.
Next press TXT button and hold, switch ON your television using main switch.
Press program + or program - to select and volume + or volume - to change value.
Save and exit press power button on remote control.

Photo by ehotelier.com

Service Menu Brandt ICC9

Service Menu Brandt ICC9
Service Mode
Switch off TV with remote control (standby possition). Switch off TV with
main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on remote control
and switch on TV with main switch. Press VT
button again. (WARNING: no any cable connect to scart, must be free.)