Ferguson W7023U TV Service Menu

Ferguson TV Type W7023U Service menu.
Before you entering Ferguson factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.

Ferguson TV Type W7023U Service menu.
Switch on your television and go to stndby mode. When The television in stndby mode Press main power to switch off
your Ferguson TV, next press and hold Program dwn and volume dwn at same time and then switch On The Ferguson TV usein main switch.

Ferguson TX92

Service Menu Ferguson TX92
CTV Hotel Mode Cancel
Put TV into standby, then turn power off, then
turn power on whilst holding standby button on
remote and step through menus to `vol set` and
increase level to max.

Ferguson

Service Menu Ferguson
ICC9 CTV Service Mode
Switch off TV with Remote Control (st-by). Switch off TV with
main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on Remote Control
and switch on TV with main switch. Press VT
button again. (WARNING: scart must be free.)