Nordmende ICC10

All TV Service Menu
Service Menu Nordmende ICC10
CTV Service Mode Nordmende
Switch to Stand By. Switch off with the mains
switch. Press and hold 'VT' on remote control then switch
on with the mains switch of Nordmende TV.

Nordmende ICC9

All TV Service Menu
Service Menu Nordmende ICC9
CTV Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press blue button on RC and switch on TV with main switch. Press blue button again. (WARNING: scart must be free.)
Nordmende ICC9 TV.

Nordmende

All TV Service Menu
Service Menu Nordmende
DC1, DC2 CTV Factory Mode Switch to Standby. Switch off Nordmende television with the mains
switch. Press and hold red button on remote control and
then switch on with the mains switch (cca 10s).
Select: numbers buttons. Adjust: +/-. Store:
red button. Exit: 'MUTE'.
Nordmende TV Setup done.

Nordmende 3038

Service Menu Nordmende 3038
Color 3038 F15-03 110° CTV MDA2061 Replacement
After replacement of the MDA 2061 (IR73) the TV receiver acts as folows: a) All programme storages have stored Ch00. b) The indicator shows German function characters. c) PAL and SECAM EAST standard recepcion is possible (not NTSC and/or SECAM WEST). If required to change according to paragr. b and c then switch off the
set by the mains switch. Press both buttons + and - for volume on TV and simultaneously switch the set on with the mains switch. Keep the two volume buttons pressed until the display indicates Pr. After 8s
the display indicates __. Now the following buttons can be presseed on the remote control, thus additional corresponding segments will be illuminated: Button '1' function symbols indicate international display. Reversible to German display with button '2'. Button '5' additional SECAM WEST and/or NTSC reception (Multistandard). Reversible to Single Standard with button '3'. Store: Stand-By.