RCA Proscam TV Service Menu

Follow @TSM

Before you entering RCA LCD factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.

RCA Proscam CTC Series Service mode
Turn on the RCA TV. Press the MENU button and keep it pressed while pressing POWER and then volume up. RCA TV, P00 is displayed and V00. Press volume up to indicate
V76, then press channel up and down to selecting items and volume + and - the the same level. To exit and save changes, press POWER.
Note: The item is the frequency P01 horizontal. If is too low
active protection, the RCA TV will locked.


Download data PDF

Share

twitter

Facebook

Linkedin

Digg

Pin it

Universal Remote - Service Mode - TV Factory menu codes

You are reading RCA Proscam TV Service Menu.
Bookmark the RCA Proscam TV Service Menu page to your favorite.
https://tvservicemenu.blogspot.com/2009/10/rca-proscam.html.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor

RCA Proscam TV Service Menu (All TV Service Menu Code)

5 stars - "RCA Proscam TV Service Menu" by Admin 2 Turn on the RCA TV. Press the MENU button and keep it pressed while pressing POWER and then volume up. RCA TV, P00 is displayed and V00. Press volume up to indicate Written on October 29, 2009