Two modes of use: S and D to enter the S mode, press VOL-on Sanyo TVS to 0, keep it pressed, press DISPLAY on the remote control.
To enter the D mode, once in the S mode, select VP60,
must have the value 00, then press VOL-on TV or released,
press DISPLAY on the remote control. To change channels or adjust
user, without leaving the service mode, press DISPLAY on Sanyo TVS remote control.
Sanyo TVS and other Chinese-2152PF TV Service Menu mode
Before you entering sanyo factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.
Sanyo TVS and other Chinese-2152PF
Photo credit : edgonline.photoshelter.com
Universal Remote - Service Mode - TV Factory menu codes
You are reading Sanyo TVS and other Chinese-2152PF. Bookmark the Sanyo TVS and other Chinese-2152PF page to your favorite.
https://tvservicemenu.blogspot.com/2009/12/sanyo-tvs-and-other-chinese-2152pf.html.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
Sanyo TVS and other Chinese-2152PF (All TV Service Menu Code)
5
stars -
"Sanyo TVS and other Chinese-2152PF"
by Admin 2
Sanyo TVS and other Chinese-2152PF TV Service menu mode, Sanyo TVS and other Chinese-2152PF TV factory mode Written on December 22, 2009