Service Menu Thomson
TX-90 CTV Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.
Before you entering Thomson TX-90 factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.
Thomson TX-90 CTV Service menu
Photo credit : interiohomedecors.com
Universal Remote - Service Mode - TV Factory menu codes
You are reading Thomson TX-90 CTV Service menu. Bookmark the Thomson TX-90 CTV Service menu page to your favorite.
https://tvservicemenu.blogspot.com/2010/02/thomson-service-menu.html?m=0.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
Thomson TX-90 CTV Service menu (All TV Service Menu Code)
5
stars -
"Thomson TX-90 CTV Service menu"
by Admin 2
Thomson TX-90 CTV Service menu mode, Thomson TX-90 CTV factory mode Written on February 19, 2010