Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.
This might work on Goldstar TVs as well, since both Zenith and
Goldstar are the same company, LG Electronics.
Press and hold the MENU button, The menu will comes up and then after a few
seconds will disapear. Press menu button and input the code 9, 8, 7, 6.
You will entering factory mode after succesfully enter the corect code.
Use the program up and down to select and volume button to change the value settings.
TO save press menu and power button.
Zenit factory code
Turn on the TV
Press and hold the Menu button to Channel time is shown up
then press the numbers 9,8,7,6 and Enter.
Press and hold 'Menu' to the menu settings disappear.
Immediately press the 'volume up' and 'Channel down' at the same time.
Immediately press the 'Channel up' and 'adjust Up' at the same time.
You are now entered in factory mode.
Use the 'Channel up' or "channel down" to select an item.
Write the old value before the change items.
Volume up and down adjust the value.
When you have made all the adjustments you want to select an item '00 '.
Reset the value back to '00 '. 11. Turn the TV off.