Turn on the TV and make sure the screen and picture is normal.
Turn off the TV by press main switch. Put the pin 7 of microprocessor to ground.
Power-on tv:a S appear in the left down corner.
Remove the strap of pin 7.
Press OSD (or RECALL) button on remote control.
To select groupe parameters use channel down button
To save factory data settings use OSD(RECALL) button on remote control
To exit from factory mode, turn off the TV by pressing main switch.
Tecnimagen 14TXN TV Service Menu
Photo credit : lcdtvrepair.us
Tecnimagen 14TXN TV Service mode
Before you entering Tecnimagen 14TXN factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.
Universal Remote - Service Mode - TV Factory menu codes
You are reading Tecnimagen 14TXN TV Service Menu. Bookmark the Tecnimagen 14TXN TV Service Menu page to your favorite.
https://tvservicemenu.blogspot.com/2014/12/tecnimagen-14txn-tv-service-menu.html.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
Tecnimagen 14TXN TV Service Menu (All TV Service Menu Code)
5
stars -
"Tecnimagen 14TXN TV Service Menu"
by Admin 2
Power-on tv:a S appear in the left down corner.
Remove the strap of pin 7.Press OSD (or RECALL) button on remote control. Written on December 29, 2014