Kenix, Apex, RCA, Kalley, Olimpo, Jwin, Olympus and others chinese television.
Before you entering Chinese TVs factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service mode code and information on these page.
jWIN China TV
Set volume to 0, to display 'picture' press MENU button on the remote control.
Inpute 6568 using remote control, Factory mode will apear on the screen.
To change the factory mode to B/W Balance adjust mode press "SLEEP" button.
Select press Pro + / Pro -
Use volume buton to change the value settings.
To select page press mute
Save and exit from factory mode press REVIEW. button
Olympus & Kenix China TV .
Find the hidden key on your remote control, there are no button to use so you can short the key using pinset or cable wire.
Factory mode will open.
Select submenu press 'SET'
Go to next submenu press again 'SET'
Use program up or down to select and use volume up or down to change the value settings.
To save press service button and shut off the tv by pressing power key.
China TV using Chip TMPA8823 and TMPA8859
Press and hold volume down and press 'DISPLAY' button on the remote control, factory mode epear as 'S' symbol and enter next factory mode to adjust by Press and hold volume down and press 'DISPLAY' button on the remote control, factory mode epear as 'D' symbol. Use p+/p- to select and volume down and up to change value.
To check different channels and setting press 'DISPLAY' key.
Olympus and jWIN China TV
Press MENU and input 6862 or 6483.
Press MENU or DISP to change the menu page.
Save and exit press power buton.
RCA China TV
Turn on the television and wait 20 minutes to enter factory mode.
Set volume to 0 by using your TV remote or universal remote.
Press mute, after mute displayed on the screen press and hold mute
Press Simultaneously press MENU on the TV panel for 3 seconds until the service mode open it.
To save and aexit factory mode please shut off the television.
or
In some model of RCA TV
Press the following sequence SLEEP, MUTE, DSP, MENU.
Follow the menu instructions.
To exit the Test Mode press SLEEP DSP.
Multi China TVs Naoky, Fisher, Columbia, Mitsui, Audiovox, Bluesky.
Set the volume to 0 and select channel 3
Press MENU then inpute 1976 then press MENU button and inpute 6483.
To unlock china TVs locked press and hold Display button for few seconds until the television is unlock.
or
Turn on the television and please wait 20 minutes.
Press the MENU button and press Q.View/Recall button and press mute.
After entering to factory mode, Press TIME button to change the menu page.
Use program up or down button to select and volume down or volume up to change the value data.
To exit and save data press menu.
or
Menu (+) 7050
Menu (+) 2580
Menu (+) 8896
Menu (+) 0000
Menu (+) 4725
Menu (+) 0323
Menu (+) 2611
Menu (+) 2008
Menu (+) 7050
Menu (+) 0203
Menu (+) 1147
Input (+) 2580
Source (+) 3195
Menu (+) 1947
Menu (+) 710
Menu (+) 1234
Menu (+) 7343
Menu (+) 7383
Menu (+) 1999
Menu (+) 1167
Menu (+) 1187
Menu (+) 1199
Menu (+) 2383
Menu (+) 1183
Menu (+) 2387
Menu (+) 1235
Menu (+) 8893
Source (+) 3138
Source (+) 0000
Source (+) 2285
Source (+) 2580
Menu (+) 9735
Menu (+) 0101
Source (+) 2583
Menu (+) 2888
Source (+) Menu (+) 0000
Menu (+) 210
Mute (+) 6483
Menu (+) 8202
Universal Remote - Service Mode - TV Factory menu codes
You are reading Chinese TVs Service Menu. Bookmark the Chinese TVs Service Menu page to your favorite.
https://tvservicemenu.blogspot.com/2014/11/chinese-tvs-service-menu.html.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor