Before you entering Pacific PTV 3604 factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
Photo credit to : www.techindustriya.com
Pacific PTV 3604 TV Service mode
Turn on the television and make sure the screen is normal.
Turn off the television by press main switch. Put the pin 7 of microprocessor to ground.(strap)
Power-on tv:a S appear in the left down corner.
Remove the strap of pin 7.
Press OSD (or RECALL) button on remote control.
Factory mode will apear on the screen.
To select group parameters use channel down button
To save factory data settings use OSD(RECALL) button on remote control
To exit from factory mode, turn off the TV by pressing main switch.