Hyundai CHASSIS NO. EX-1A/1A1/1A2
Entering Hyundai TV Factory mode
Set the volume to 0. Then press and hold the MUTE button on the remote control, and press the MENU button on the TV to enter the Factory mode. (In this case, the S mode cannot be stored in the EEPROM. To exit from the S mode, turn off the Television. )
6.1.2 After entering the S mode, Red S is displayed on the upper center of the screen and MENU1 is default. Use the POS+/- buttons to highlight an adjustment and the VOL+/- buttons to adjust
it. The adjusted data are immediately output and stored in the EEPROM.
With remote control system software TDA935X, all options can be set in the SERVICE mode and
stored in EEPROM. Data related to picture, sound and geometric adjustment are also stored in
Hyundai H-TV1402 TV Service mode for Hyundai model 37CTV3150/54CTV3152
Before you entering Hyundai factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.
Photo by galleryhip.com