SETTING THE SERVICE ADJUSTMENT MODE
Turn off the television
Press the following buttons on the remote control within a second of each other: Display => Channel 5 => Sound Volumne + => Power.
The following screen appears on the screen
SERVICE ADJUSTMENT MODE
The SCREEN displays the item being adjusted.
Press 1 or 4 on the remote control to select the item.
Press 3 or 6 on the remote control to change the data.
Press 2 or 5 on the remote control to change the category.
Every time you press 2 (Category Up)
To go back to the most recently saved value 0 then ENTER to read the memory.
Press MUTING then ENTER to write into memory.
When you want to exit Service Mode, turn the power off.
Press 8 then ENTER on the remote control to set the shipping conditions or turn set off and on to exit.
MEMORY WRITE CONFIRMATION METHOD
1. After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again.
2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again to confi rm they were adjusted.
Photo credit : homeaway.com
SONY KDF-42WE655, SONY KDF-50WE655 TV Service mode
Before you entering SONY 42WE655 and KDF-50WE655 factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.