How to enter into the factory mode
1. You can press "source-2-5-8-0" to go into factory setting.
2. Use channel up or channel down to select parameter.
3. Use volume up/volume down to change the value settings
To exit from factory mode press "Exit" button
Photo credit to inisdesign.com
Content How to enter into the factory mode AIWA BBHTN180.
1: ADC setup: set ADC value of YUV,VGA. It can also be auto-set. Adopt 100%
color bar to yuv and Checkerboard signal to vga.
2:Adjust the brightness and contrast ratio of each signal, which do not affect the
value of user's menu.
3: adjust the color temperature and white balance of each signal source.
4: SSC to adjust the spectrum for passing the EMC test.
5:special set
1)2hour off-- for Aging test
2)WDT --watch dog
3)white pattern --set pure color output for the panel, used at the checking and
aging test for panel.
4)Reset
5)set the recorder
6)set power-on screen display.
6:QMAP adjust :adjust color quality.
7:PEQ set sound EQ
8:sw information: to check the sofeware information
9:UART DEBUG : Access to serial port and connect a computer if set to HK.
10:BMTEST :cpu check the CPU
The last line is SW Ver.No
1: ADC setup: set ADC value of YUV,VGA. It can also be auto-set. Adopt 100%
color bar to yuv and Checkerboard signal to vga.
2:Adjust the brightness and contrast ratio of each signal, which do not affect the
value of user's menu.
3: adjust the color temperature and white balance of each signal source.
4: SSC to adjust the spectrum for passing the EMC test.
5:special set
1)2hour off-- for Aging test
2)WDT --watch dog
3)white pattern --set pure color output for the panel, used at the checking and aging test for panel.
4)reset
5)set the recorder
6)set power-on screen display.
6:QMAP adjust :adjust color quality.
7:PEQ set sound EQ
8:sw information: to check the sofeware information
9:UART DEBUG : Access to serial port and connect a computer if set to HK.
10:BMTEST :cpu check the CPU The last line is SW Ver.No
Universal Remote - Service Mode - TV Factory menu codes
You are reading AIWA BBHTN180 TV Service Menu. Bookmark the AIWA BBHTN180 TV Service Menu page to your favorite.
https://tvservicemenu.blogspot.com/2015/02/aiwa-bbhtn180-tv-service-menu.html.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
AIWA BBHTN180 TV Service Menu (All TV Service Menu Code)
5
stars -
"AIWA BBHTN180 TV Service Menu"
by Admin 2
AIWA BBHTN180 TV Service Mode Chassis MSD306
How to enter into the factory mode
1. You can press "source-2-5-8-0" to go into factory setting.
2. Use channel up or channel down to select parameter. Written on February 09, 2015