Philips LCD TV Service menu
Philips LCD Chassis BJ3.0A LA
Philips LCD Chassis BJ3.0A PA
Philips LCD Chassis FJ3.0E LA
Service Modes
Service Default mode (SDM) and Service Alignment Mode (SAM) offers several features for the service technician, while the Customer Service Mode (CSM) is used for communication between the call centre and the customer.
This chassis also offers the option of using ComPair, a hardware interface between a computer and the TV chassis. It offers the abilities of structured troubleshooting, error code reading, and software version read-out for all chassis.
Minimum requirements for ComPair: a Pentium processor, a Windows OS, and a CD-ROM drive (see also paragraph "ComPair").
Service Default Mode (SDM)
Purpose
• To create a pre-defined setting, to get the same measurement results as given in this manual.
• To override SW protections detected by stand-by processor and make the TV start up to the step just before protection (a sort of automatic stepwise start up). See paragraph “Stepwise Start Up”.
• To override SW protections detected by Viper. Depending on the SW version it is possible that this mechanism does not work correctly. See also paragraph “Error codes”.
• To start the blinking LED procedure (not valid in protection
Universal Remote - Service Mode - TV Factory menu codes
You are reading Philips LCD BJ3 TV Service menu. Bookmark the Philips LCD BJ3 TV Service menu page to your favorite.
https://tvservicemenu.blogspot.com/2015/04/philips-lcd-bj3-tv-service-menu.html.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
Philips LCD BJ3 TV Service menu (All TV Service Menu Code)
5
stars -
"Philips LCD BJ3 TV Service menu"
by Admin 2
Enter to Philips LCD BJ3 TV Service menu mode Written on April 30, 2015