How to get to Adjustment mode
Using the front control buttons with the set turned off (standby) can activate it.
Press the SUB-POWER button, INPUT SELECT button and channel down button at the same time, and hold for
more than 5 seconds.
The set turns on in adjustment mode with OSD.
Changing data and Selecting Adjustment code
When the set is in adjustment mode, the cursor volume down, volumne up, channel up, channel down and OK buttons of the remote control or front
panel may be used as the adjustment keys.
channel up, channel down buttons are used for selecting adjustment code.
volume up, volume down buttons are used for changing data values.
OK button is used for confirming the data.
After finishing the necessary adjustment press MENU button. Adjustment mode is released and the set
returns to normal condition.
Hitachi 42PD4200 TV Service Menu
Photo credit : fashion-kid.net
Memory Initialize operation
NOTE: The execution of this function returns the adjustment codes to the preset values, therefore, adjustment
data will be lost.
Procedure
(1) Enter Adjustment Mode.
(2) Select MEMORY INIT adjustment code (No.744) and change the data value from 0 to 1.
(3) Activate MEMORY INIT by pressing OK button for more than 3 seconds.
(4) Select No.374 and change data value from 1 to 0.
(5) Check that the receiving channel goes to AV1. Unit is set to preset values.
Universal Remote - Service Mode - TV Factory menu codes
You are reading Hitachi 42PD4200 TV Service Menu. Bookmark the Hitachi 42PD4200 TV Service Menu page to your favorite.
https://tvservicemenu.blogspot.com/2016/05/hitachi-42pd4200-tv-service-menu.html.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
Hitachi 42PD4200 TV Service Menu (All TV Service Menu Code)
5
stars -
"Hitachi 42PD4200 TV Service Menu"
by Admin 2
Hitachi 42PD4200 TV Service menu mode, Hitachi 42PD4200 factory mode Written on May 26, 2016