Before you entering Aiwa factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below not match to your television please browse another service code in sitemap page.
AIWA VX series.
Turn off the television in 30 minutes or short the main condeser to Back-Up maintains programming.
Set the volume to a minimum (0), and simultaneously press the VOL down button and key 9 in the remote control. With the buttons 1-7 (or 1-8 in some models) will select the different modes (sub-menu) to adjust. With volume up / down to adjusted the value. Press 8 (or 0 in some models) save settings and exit from factory mode.
Universal Remote - Service Mode - TV Factory menu codes
You are reading AIWA VX series TV Service Menu. Bookmark the AIWA VX series TV Service Menu page to your favorite.
https://tvservicemenu.blogspot.com/2009/03/aiwa-vx-series.html?m=0.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
AIWA VX series TV Service Menu (All TV Service Menu Code)
5
stars -
"AIWA VX series TV Service Menu"
by Admin 2
Turn off the television in 30 minutes or short the main condeser to Back-Up maintains programming.
Set the volume to a minimum (0), Written on March 15, 2009