Hisense model LCD26V88AM and Hisense LCD32V88AM
Another type and model browse here http://tvservicemenu.blogspot.com/search/label/Hisense
Use your own Hisense TV remote control
1. Turn on the television
2. Press Menu button and call up User OSD Menu
3. Select Sound-> Balance to no sound.
4. When Balance value is “0”,Enter 0->5->3 ->2 in sequence.
5. Factory OSD appears.
6. Press the standby button then AC turn off and restart the TV, which can exit factory OSD
menu.
HiSense TV Service mode
Press Menu button and select SOUND parameters.
Set the television volume to 0.
Insert the code 0,5,3,2
Factory mode will shown on the screen.
To change the parameter value press volume up and down.
To Select parameter press program up or down.
To save press menu and exit press power main switch button.
Before you entering Hisense factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code below do not match to your television please browse another service code in sitemap page.
Hisense TV Service Menu
Photo by www.123rf.com
Universal Remote - Service Mode - TV Factory menu codes
You are reading Hisense TV Service Menu. Bookmark the Hisense TV Service Menu page to your favorite.
https://tvservicemenu.blogspot.com/2014/11/hisense-tv-service-menu.html?m=0.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
Hisense TV Service Menu (All TV Service Menu Code)
5
stars -
"Hisense TV Service Menu"
by Admin 2
Enter to service menu-mode, Press Menu button and select SOUND parameters. Set the television volume to 0.
Insert the code ...... Written on November 30, 2014