Television power off ( do not turn to standby mode )
TV off by unplug the Power Cable from main power source.
Make sure no electric input to your tv set
Press Power, Volume (-), TV input button and hold the 3 key you pressed (Hold all the key together)
Re plug in the power cable to main power source, "Binary bit detected signal" Shown.
after that release the power button and keep hold the volume (-) and TV input button.
The K letter will shown on the screen and you can release the both button, you enter to service mode.
Press Channel (-) and VOL (-) button. Service menu will open on the screen
Use remote control to set the television.
Photo credit to www.vacationhomerentals.com
Universal Remote - Service Mode - TV Factory menu codes
You are reading Sharp LC-32M400M LCD TV Service menu. Bookmark the Sharp LC-32M400M LCD TV Service menu page to your favorite.
https://tvservicemenu.blogspot.com/2015/02/sharp-lc-32m400m-lcd-tv-service-menu.html.
Author : Meilyn, Ricky and Akzai Rajali
Editor : Denny Wowor
Sharp LC-32M400M LCD TV Service menu (All TV Service Menu Code)
5
stars -
"Sharp LC-32M400M LCD TV Service menu"
by Admin 2
How to enter to Sharp AQUOS LC-32M400M LCD TV Service menu mode Written on February 23, 2015